Core Combination Mat

Introduction

The Core Combination mat is compatible with polyester, vinylester, phenolic and epoxy resins, it is a complex of chopped glass fibers and non-weave fabric, this product is widely used in hand lay-up and RTM processes, it can be used most widely in the boat industry and the typical end-use applications include FRP boat hulls, automotive housings, laminating panel, large size FRP pole, etc..

Identification

Example: CCM300/180-1270mm

300: Nominal weight per square meter of mat

180: Nominal weight per square meter of core

1270mm: The width of product

Product&Specification

No.	ITEM	Area weight (g/m²)	Mat (g/m²)	Core (g/m²)	Stitch (Gauge/inch)	Width (mm)
No.	ITEM	Area weight (g/m²)	Mat (g/m²)	Core (g/m²)	Stitch (Gauge/inch)	Width (mm)
1	CCM200/180	380±10%	200	180	3.5	1270
2	CCM300/180	480±10%	300	180	3.5	1270
3	CCM200/180/200	580±10%	200+200	180	3.5	1270
4	CCM300/180/300	780±10%	300+300	180	3.5	1270
5	CCM300/250/300	850±10%	300+300	250	3.5	1270
6	CCM450/180/450	1080±10%	450+450	180	3.5	1270
7	CCM450/250/450	1150±10%	450+450	250	3.5	1270
8	CCM600/180/600	1380±10%	600+600	180	3.5	1270
9	CCM600/250/600	1450±10%	600+600	250	3.5	1270
10	CCM750/180/750	1680±10%	750+750	180	3.5	1270
11	CCM750/250/750	1750±10%	750+750	250	3.5	1270
12	CCM900/180/900	1980±10%	900+900	180	3.5	1270
13	CCM900/250/900	2050±10%	900+900	250	3.5	1270

Packing

Product is manufactured in a form of a roll wound on a paper tube and then packed in a plastic film and placed within a cardboard carton, Rolls can be loaded into a container directly or on a pallets.